Nortel Networks P0607274 0 Enable the console (batch file)

26 Chapter 2 Install and Initialize the Uninterruptable Power Supply

P0607274 02

Enable the console (batch file)

Use this procedure to use the serial port for startup or emergency maintenance purposes.

1If you have access to the Unified Manager, from Services/UPS, select the console.

2If you have an access to the BCM through the IP, Telnet to the BCM using the IP connection

and run the batch file called “EnableConsole.bat” located on “F:\Program Files\Nortel

Networks\Voice Platform”.

3Running EnableConsole.bat does the following:

• Changes the value of the register key to

“KEY_LOCAL_MACHINE\SOFTWARE\APC\GUI\SerialSelect” to 0

• Stops the UPS service and changes its startup type to Manual.

• Changes the CMDRMT (Console Service) startup type to AUTOMATIC and start it.

4This procedure is complete.

Contents

Main Copyright 2004 Nortel Networks Trademarks North American Regulatory Information Safety Radio-frequency Interference Telecommunication Registration Electromagnetic Compatibility Telephone Company Registration Rights of the Telecommunications Company Repairs Canadian Regulations - please read carefully Notice US Regulations - please rea d carefully Federal Communications Commission (FCC) Notice Important Safety Instructions Installation Use 8 P0607274 02 Safety WARNING! Risk of shock. Only qualified persons should service the system. Chapter 1 Uninterruptable Power Supply (UPS) Overview . . . . . . . . . . . . . . . . . . . . . 15 Chapter 2 Install and Initialize the Uninterruptable Power Supply. . . . . . . . . . . . . . . 23 Page Preface Display Tips Symbols used in this guide Text conventions Related publication s How to Get Help Page Chapter 1 Uninterruptable Power Supply (UPS) Overview UPS Overview BCM and UPS power and control con n ect i o ns UPS threshold values Alarm and event reporting 18 Chapter 1 Uninterruptable Power Supply (UPS) Overview P0607274 02 Table 1 UPS Event messages Chapter 1 Uninterruptable Power Supply (UPS) Overview 19 UPS Installation and Configuration Guide Table 1 UPS Event messages Operational measurements and accou n ting Log files and traces UPS default configuration settings Page Page Chapter 2 Install and Initialize the Uninterruptable Power Supply Install and Initializ e the UPS Initialize the serial port UPSConsoleToggle Service Enable UPSConsoleToggle Enable the console (batch file) Chapter 3 Monitor the Uninterruptable Power Supply Monitor the UPS Access the UPS Status monitor Access the UPS OM and log reports Access the UPS status report Test the UPS