NorthStar Navigation 8000I operation manual Camera, What types of camera are supported?

40 Camera

The 8000i can integrate video feed from an onboard camera.

An onboard camera can improve the security of your vessel, or be useful for docking, for rear vision, or for viewing the engine room.

You can use a conventional camera or an Axis Network camera. This section explains how to use an Axis Network camera.

40.1What types of camera are supported?

You can use either of the following Axis Network cameras with the 8000i:

•

•

Axis 206 fixed camera Axis 211 fixed camera

If you're using a conventional camera, you can connect it to the 8000i using the

Video Aux I (see "Video Aux In" page 187)n facility and view the video feed through Video Aux In.

40.2Add the camera to the network

The new camera must be installed according to the manufacturer's instructions, then plugged into the 8000i system.

To add the camera to the network:

1.Select Display.

2.Select Camera. The 8000i automatically detects the new camera.

40.3View the camera in full screen mode

To view the camera in full screen mode:

1.If you want the camera to cover the entire screen, select Full Screen from the camera control panel.

2.To show the camera control panel again, just touch or click anywhere on the screen.

Northstar 8000i Operation Manual 189