NorthStar Navigation 8000I operation manual 3D Steer

11.11	Select and follow a route from the Routes Library	81
11.12	Select and follow a route with GoTo	81
11.13	Follow a route	82
11.14	Navigate to the previous or next waypoint	82
11.15	Stop following a route	82
11.16	Hide an inactive route	83
11.17	Delete a route	83
11.18	Reverse your route	83
11.19	Display and/or change the route details	84
11.20	Reset the XTE on an active route or waypoint	84
11.21	Set up routes to be shown or hidden	85
11.22	Show the route length and estimated travel time	85
12	Set up navigation	87
12.1	Select the bearing mode	87
12.2	Select the variation source	88
12.3	Set the manual variation	88
12.4	Select the position data format	89
12.5	Set the look ahead distance to update chart	89
12.6	Set the center circle to update chart	90
12.7	Set the amount of time represented by the course predictor line	90
12.8	Set the angle delay to update the chart	91
12.9	Set the waypoint arrival distance	91
12.10	Select whether to continue navigating at the route end	92
13	Introduction to 3D Chart	93
13.1	Display the 3D Chart screen	93
13.2	Reposition the 3D Chart screen to show your vessel	93
13.3	Pan the 3D Chart to show new areas	94
13.4	Rotate the view of the 3D Chart manually	94
13.5	Change the azimuth setting on 3D Chart	94
13.6	Change the camera angle for 3D Chart	95
13.7	Change the elevation manually	95
13.8	Enhance the vertical scale	96
13.9	Change the vessel mode	96
13.10	Show/hide the bathymetric data	96
13.11	Overlay satellite or aerial photos on 3D Chart	97
13.12	Synchronize 3D Chart and the chart screen	97
14	3D Steer	99
14.1	Display the 3D Steer screen	99
14.2	What does 3D Steer show?	99
14.3	When to reset the XTE	99

Northstar 8000i Operation Manual 9