NorthStar Navigation 8000I operation manual Use routes and waypoints, Copy an existing route

11 Use routes and waypoints

The 8000i stores all your routes in the Routes Library. Named waypoints are stored in the Waypoints Library.

You can:

•copy an existing route

•create a new route

•move a waypoint in a route

•add a new waypoint into a route

•add a new waypoint to the start or end of a route

•delete a waypoint from a route

•change the order of waypoints in a route

•add an existing waypoint to a route

•display the Routes Library

•select and follow a route from the Routes Library

•select and follow a route with GoTo

•follow a route

•navigate to the next or previous waypoint

•stop following a route

•hide an inactive route

•delete a route

•reverse your route

•display and/or change the route details

•reset the XTE on a route

•set up routes to be shown or hidden

•show the route TTG and Total Time

11.1Copy an existing route

You can use this to save time when you want to create a new route that is very similar to an existing route.

After you have copied the route, you can change the route name and the route details to create your new route.

To copy a route:

1.Display the Chart screen and the control panel. If you can't see the

Waypoints Routes & Tracks button, select Return.

2.Select Waypoints Routes & Tracks.

3.Select Routes Library. The Routes Library box is displayed only on your Chart screen. It lists all the stored routes

4.Select the route you want to copy, then select Copy Route. The 8000i makes a copy of the route and adds it into the Routes Library with "Copy" added to the original route name.

Northstar 8000i Operation Manual 75