NorthStar Navigation 8000I operation manual Find a waypoint, Display the waypoint details

that waypoint. (If the radius is zero, the thin red line is not shown and you must select the waypoint again then drag outwards from the waypoint to see it.)

4.To:

ƒremove the warning zone from the waypoint, select Remove Warning Zone.

ƒchange the radius of the warning zone, just drag the thin red line to the new position.

5.The new setting is shown immediately and stays until you change it again.

6.When you are finished, select Finish. The warning zone is immediately highlighted in color.

10.9Find a waypoint

To find a waypoint:

1.Display the Chart screen and the control panel. If you can't see the

Waypoints Routes & Tracks button, select Return.

2.Select Waypoints Routes & Tracks.

3.Select Waypoints Library. The Waypoints Library box is displayed only on your Chart screen. It lists all the stored waypoints.

4.Select the waypoint, then select Waypoint Details.

5.Select Find On Chart. The 8000i immediately centers the Chart screen on the selected waypoint, and closes the Waypoints Library.

10.10Display the waypoint details

There are two ways to display the details of a waypoint. You can either:

•use the waypoints library, or

•select the waypoint when it's displayed on your Chart screen.

NOTE: If you do not give a waypoint a specific name (such as North Bay) it is not listed in the Waypoints Library.

To select the waypoint from the chart screen:

1.Just select the waypoint on your Chart screen. The 8000i highlights that waypoint with a red circle and displays a list of options in the control panel.

2.Select Waypoint Details to immediately display all the details about that waypoint.

3.When you are finished, select Return.

To select a waypoint from the waypoints library:

1.Display the Chart screen and the control panel. If you can't see the

Waypoints Routes & Tracks button, select Return.

2.Select Waypoints Routes & Tracks.

72 Northstar 8000i Operation Manual