NorthStar Navigation 8000I operation manual Turn off, Keys on the 15 inch Monitor

2.2Turn off the 8000i

To turn off the 8000i using a 12" Display Processor:

1.Hold down the Power key. The Northstar 8000i countdown screen appears, then the 12" Display Processor turns off automatically. (If you want to cancel shutdown, just release the button.)

To turn off the 8000i using a 15" Monitor (preferred method):

Use this method when the Black Box Processor and the 15" Monitor are both wired together as recommended in the 15’’ Installation Manual.

1.Hold down the Power key on the 15" Monitor for about three seconds to turn off the 8000i.

To turn off the 8000i using a 15" Monitor (alternative method):

Use this method when the Black Box Processor and the 15" Monitor are wired independently.

1.Hold down the Power key on the 15" Monitor for about three seconds to turn off the 15" Monitor.

2.Hold down the Power (ON/OFF) key at the back of the Black Box Processor until the red Power LED goes out.

2.3The keys on the 15 inch Monitor

The "keys" are physical keys that you can depress. The following keys are shown on your 15" Monitor:

A

B

C

Key

Power

Up Arrow

Down

Arrow

Function when NOT in	Function in OSD mode
OSD mode

Press once to turn on. Hold down for three seconds to turn off.

If correctly wired using the Remote Power On feature this key also controls the power status of the Northstar 8000i Black Box Processor

Press to step up through the	Press once to step up through
other video input source options.	the OSD options.
Press to show the current video	Press once to step down through
input source in the top left corner	the OSD options.
of the screen.
Press again to step down through
the other video input source
options.

Northstar 8000i Operation Manual 19