NorthStar Navigation 8000I operation manual Use the chart views

7.8	Select the default icon for a waypoint	59
7.9	Select the default icon for an event mark	59
7.10	Set the deep water contour	59
7.11	Show/hide your current track	60
7.12	Show/hide the chart boundaries	60
7.13	Show/hide shade safe depths	61
7.14	Show/hide the Lat/Long grid overlay	61
7.15	What are light sectors?	62
7.16	Show/hide the light sectors	62
7.17	Show/hide tidal flow and currents	62
8	Use the chart views	63
8.1	Default settings for the chart views	63
9	Use the chart overlays	65
9.1	Overlay the radar	65
9.2	Adjust the settings for the radar	66
9.3	Change the radar mode	66
9.4	Adjust the radar opacity	66
9.5	Overlay satellite or aerial photos	67
9.6	Overlay the ports and marinas	67
9.7	Overlay roads, terrain, SAR and/or GMDSS areas	67
10	Use waypoints	69
10.1	Create a waypoint	69
10.2	Create an event mark	69
10.3	Select and show a waypoint on the chart	70
10.4	Hide a waypoint	70
10.5	Delete a waypoint	70
10.6	Navigate to a waypoint	71
10.7	Stop navigating to a waypoint	71
10.8	Set/remove the warning zone for a waypoint	71
10.9	Find a waypoint	72
10.10	Display the waypoint details	72
10.11	Change the waypoint details	73
10.12	Display the waypoints library	73
10.13	Delete a waypoint from the Waypoints Library	74
11	Use routes and waypoints	75
11.1	Copy an existing route	75
11.2	Create a new route	76
11.3	Move a waypoint in a route	77
11.4	Add a new waypoint into a route	77
11.5	Add a waypoint to the start or end of the route	78
11.6	Remove a waypoint from a route using the Routes Library	79
11.7	Remove a waypoint from a route using the Chart screen	79
11.8	Change the order of the waypoints in a route	80
11.9	Add an existing waypoint to a route	80
11.10	Display the Routes Library	81
8	Northstar 8000i Operation Manual