NorthStar Navigation Northstar NS100 quick start Display and navigate a menu

Models: Northstar NS100

1 74
Download 74 pages 20.43 Kb
Page 12
Image 12

Button Function

Escape. Press to cancel any changes, return to the previous mode, or backup.

Enter. Press to confirm and accept any input or changes.

Function. Provides access to the following useful radio functions when combined with the button number indicated:

FUNC 1 Radio Menu mode. Press FUNC then 1 to display the radio menu and DSC setup options and to enter menu mode. (Also see Reference Section 1 and Reference Section 2.)

FUNC 3 Backlighting. Press FUNC then 3 to set the backlight level for the LCD screen and handset buttons. (Also see Adjust the backlighting.)

FUNC 4 Hailer. NS100 DS only. Press FUNC then 4 to enter hailer mode. (Also see Use the hailer on the NS100 DS.)

Button Function

FUNC 6 Intercom. NS100 DS only. Pick up your handset, then press FUNC then 6 to activate the intercom. (Also see Use the intercom on the NS100 DS.)

FUNC 7 Transmission power. Press FUNC then 7 to change the transmission power setting. Press FUNC then

7 again to return to the previous setting.

FUNC 9 Fog mode. NS100 DS only. Press FUNC then 9 to enter the fog mode. (Also see Use the foghorn.)

Distress. (Red button located on right hand side of handset). To make a distress call, lift the hinged protective cover from the button. Then either press DISTRESS to show the Nature of Distress categories OR hold down DISTRESS to send an undefined distress call. (Also see Reference Section 5 - Send a Distress call.)

Display and navigate a menu

Only a few menu options can be displayed at any one time on the LCD screen. To show the menu options:

1.Press FUNC then press 1 to display the first four radio menu options OR press CALL to display the DSC call menu.

2.Press ^CH/SEL or CH/SELv to scroll up and down the menu until the cursor is postioned at the desired option.

3.Press >ENT to display that option. Make any entries or changes, if required.

4.Press >ENT to confirm changes OR press <ESC to keep the original entry. Any changes are active as soon as you exit the menu.

5.Press <ESC to backup to the previous screen or to exit the menu completely.

Quickstart Guide

Quickstart Guidee

11

Page 12
Image 12
NorthStar Navigation Northstar NS100 quick start Display and navigate a menu