Enter your ATIS ID
LOCAL/DIST
USA/INT/CAN
GPS/DATA
>DSC SETUP
DSC SETUP
LLREPLY DSC FUNC
>ATIS ID
INPUT USER ATIS ID
9________
987654321 ATIS ID ENT>STORE ESC>CANCEL
USERATISID INPUT AGAIN
_________
987654321 ATIS ID ENT>STORE ESC>CANCEL
WARNING!
This is a
If you are navigating inland waterways within Europe, you must enter your ATIS ID to access ATIS functionality. ATIS will send a digital signal anytime you release the PTT key.
1.Select DSC SETUP and press >ENT.
2.Move the cursor to ATIS ID and press >ENT. If this is the first time that you are entering your ATIS ID, a dashed line appears with 9 shown as the first number. Note that an ATIS ID always starts with 9.
3.Enter the rest of your ATIS ID numbers along the dashed line. The cursor automatically moves to the next space after you enter each number.
If you make an error, press <ESC to clear all the numbers you have entered so far and return to the DSC SETUP menu, so that you can start again.
4.When you have entered your ATIS ID correctly, press >ENT.
5.You must reenter your ATIS ID again as a check, then press >ENT again to permanently store your ATIS ID in the radio.
You can view your ATIS ID any time by selecting ATIS ID in the DSC SETUP menu.
Turn the ATIS functions on/off
LOCAL/DIST |
| DSC SETUP |
| ATIS FUNC |
USA/INT/CAN |
| DSC FUNC |
| >ON |
GPS/DATA |
| ATIS ID |
| OFF |
>DSC SETUP |
| >ATIS FUNC |
|
|
Inland waterways rules require 1W Tx power on channels 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, and 77.
1.Select DSC SETUP and press >ENT.
2.Move the cursor to ATIS FUNC and press >ENT.
3.Press >ENT again if you want to turn the ATIS functions ON and the ATIS symbol will appear on the LCD screen to confirm that your vessel has ATIS functionality,
OR
move the cursor to OFF and then press <ENT to turn ATIS functionality OFF.
NOTE: It is not possible to have ATIS and DSC operating simultaneously. When you turn one ON, the other will turn OFF. If they are both off, you must turn on DSC to get DSC functionality.
36 | Northstar NS100 |
|
