Select the time format
BUDDY LIST |
| GPS/DATA |
LOCAL/DIST |
| MANUAL |
USA/INT/CAN |
| >SETTING |
>GPS/DATA |
|
|
|
|
|
SETTING TIME OFFSET >TIME FORMAT TIME DISPLY
TIME FORMAT >12 24
23:30 LOC
PORT OPS
N35’.43.211’
E123’45.113’ 11.30PM LOC
1.Move the cursor to GPS/DATA and press >ENT.
2.Move the cursor to SETTING and press >ENT.
3.Move the cursor to TIME FORMAT and press >ENT. There is a choice of a 12 hour time format that uses AM and PM suffixes, or a 24 hour time format.
4.Press >ENT again to select the 12 hour time format
OR
move the cursor to 24 and then press >ENT to select the 24 hour time format.
The new time format is displayed immediately.
Show or hide the time
BUDDY LIST |
| GPS/DATA |
| SETTING |
| TIME DISPLAY |
LOCAL/DIST |
| MANUAL |
| TIME OFFSET |
| >ON |
USA/INT/CAN |
| >SETTING |
| TIME FORMAT |
| OFF |
>GPS/DATA |
|
|
| >TIME DISPLY |
|
|
If you have entered the time manually (see Reference Section 1 - Set your position and time manually), the time is always shown on the screen with the prefix MAN.
However, if the time is being updated through a GPS navigation receiver, you can show or hide the time on the LCD screen.
1.Move the cursor to GPS/DATA and press >ENT.
2.Move the cursor to SETTING and press >ENT.
3.Move the cursor to TIME DISPLY and press >ENT again.
4.Press >ENT again to have the LCD screen show the time
OR
move the cursor to OFF and then press <ENT to hide the time.
Reference Manual | 25 |
|
