Reply to the last incoming call
DSC CALL INDIVIDUAL >LAST CALL GROUP
787878787 |
| 787878787 |
INDIVIDUAL |
| INDIVIDUAL |
ROUTINE |
| ROUTINE |
>SET CHANNEL |
| >SEND? |
787878787 INDIVIDUAL ROUTINE CALLING...
PORT OPS/VTS 787878787 INDIVIDUAL WAITING ACK
INDV ACK 787878787 PRESS PTT
The person you are calling must also have a radio with DSC functionality.
1.Press CALL to display the first three options of the DSC CALL menu.
2.Press >ENT to have the radio display the MMSID and other details about the most recent incoming call.
3.If you want to reply, press >ENT to select the working channel. Otherwise, press <ESC. (Note: you cannot usually call a duplex channel so these are automatically eliminated. If the call is to a Coast Station the radio will recognize this and select the correct frequency.)
4.The call details are summarized on the LCD screen. Press >ENT to send the call. The radio checks the status of CH70 and if it is busy, waits for 2 seconds before rechecking.
When CH70 is free, the call is sent and the TX symbol appears on the LCD screen.
5.If the call is acknowledged, press PTT to talk on the working channel.
If there is no reply, try making the call again. (See Reference Section 3 - Retry a routine call.)
Make a routine call to an individual
DSC CALL >INDIVIDUAL LAST CALL GROUP
INDIVIDUAL >MANUAL NEW JON
BILL
MANUAL MMSID
_________
345634563 INDIVIDUAL ROUTINE >SET CHANNEL
345634563 INDIVIDUAL ROUTINE ENT>SEND?
345634563 INDIVIDUAL ROUTINE CALLING...
345634563 INDIVIDUAL ROUTINE WAITING ACK
The person you are calling must also have a radio with DSC functionality.
1.Press CALL to display the first three options of the DSC CALL menu.
2.Move the cursor up to INDIVIDUAL then press >ENT. You can send a call to one of your buddies or to another individual.
3.To call a buddy, scroll through your buddy list, select the name and then press >ENT.
To call an individual that is not in your buddy list, press >ENT to select MANUAL NEW. You
must enter the individual's MMSID and then press >ENT. (If you enter a wrong digit, press <ESC to erase it.)
4.Select the working channel and press >ENT. (You cannot usually call a duplex channel so these are automatically eliminated. If the call is to a Coast Station the radio will recognize this and select the correct frequency.)
Reference Manual | 39 |
|
