NorthStar Navigation Northstar NS100 Enter your Mmsid, Enter a new group Mmsid, Special Note

Enter your MMSID

LOCAL/DIST

USA/INT/CAN

GPS/DATA

>DSC SETUP

DSC SETUP >USER MMSID GROUP SETUP INDV REPLY

INPUT MMSID

_________

187654321 MMSID ENT>STORE ESC>CANCEL

USER MMSID INPUT AGAIN

_________

187654321 MMSID ENT>STORE ESC>CANCEL

WARNING!

This is once-only operation. You can display and read your MMSID at any time, but you get only one opportunity to store your MMSID in the radio. You cannot change it after you have stored it.

1.Select DSC SETUP and press >ENT.

2.Press >ENT again to select the USER MMSID option.

3.If this is the first time that you are entering your MMSID, a dashed line appears.

Enter your nine-digit MMSID along the dashed line. The cursor automatically moves to the next space after you enter each digit.

If you make an error, press <ESC to clear all the numbers you've entered so far, and return to the DSC SETUP menu so that you can start again.

4.When you have entered your MMSID correctly, press >ENT.

5.You must reenter your MMSID again as a check, then press >ENT again to permanently store your MMSID and return to the menu.

You can view your stored MMSID at anytime by selecting USER MMSID in the main menu.

SPECIAL NOTE:

After storing your MMSID, check if the DSC FUNC is selected ON. If it is OFF, you must set it to ON. See Page #35 for details.

Enter a new group MMSID

LOCAL/DIST

USA/INT/CAN

GPS/DATA

>DSC SETUP

DSC SETUP	GROUP SETUP	GROUP NAME	ENTER NAME	ENTER NAME	FISHING
USER MMSID	>MANUAL NEW	_________	FISHING	FISHING	023456789
>GROUP SETUP	GROUP 1	GROUP MMSID	ENTER MMSID	ENTER MMSID	ENT>STORE
INDV REPLY	GROUP 2	0________	0_________	023456789	ESC>CANCEL

If you call the same group of people frequently, you can store their details in a group MMSID. Then, when you call that group MMSID, every person in the group receives your call automatically.

You can store a maxmimum of five group MMSIDs.

A group MMSID always starts with 0.

1. Select DSC SETUP and press >ENT.

2.Move the cursor to GROUP SETUP then press >ENT.

3.Press >ENT again to select MANUAL NEW. If this is the first time that you are entering a group name OR if an unused group MMSID is available, a dashed line appears. (Otherwise, the existing group names are displayed for you to edit or delete.)

32 Northstar NS100