Receive and reply to a distress call

PORT OPS/VTS

 

RCV:DISTRESS

 

RCV:DISTRESS

N 39 27.021’

 

123451234

 

N 12.12.121’

E135 12.011’

 

FIRE

 

E121.12.121’

T 09:34 UTC

 

ESC->EXIT

 

T 09:36 UTC

IMPORTANT!

You can establish voice contact with the distressed vessel, as described here, but the Coast Guard is the only agency allowed to send a distress acknowledgement.

When the radio picks up an incoming distress call:

1.The radio beeps loudly to alert you to the incoming distress call and the working channel changes automatically to CH16. Press any key except PTT or <ESC if you want to stop the beeps.

At the same time, the LCD screen displays the BUSY symbol, the category of the distress, and the MMSID (or buddy name) of the distressed vessel. After one second, the LCD display changes to show the position of the distressed vessel and the time of the distress transmission.

These two screens alternate once every second.

If the vessel's position isn't specified, a series of dashed lines are shown instead.

2.Press PTT to establish voice contact with the distressed vessel or press <ESC to maintain a listening watch on CH16.

The details of the incoming call are stored in the distress log. If the distress log is full, the oldest entry is automatically deleted.

Call back using the distress logs

DSC CALL

ALL SHIPS

CALL LOG

>DISTRES LOG

DISTRES LOG >DISTRESS RELAY

RELAY LOG 01 DIST RELAY 678678678 FLOODING

N 38 27.021’ E137 12.011’ T 12:27 UTC

SENT FROM 987654321

ENT> OPERATE

987654321 >CALL BACK DELETE SAVE MMSID

IMPORTANT!

You can establish voice contact with the distressed vessel, but ONLY the Coast Guard is allowed

to send a distress acknowledgement.

The radio has two distress logs that each hold the details of ten distress calls. The DISTRESS log stores received distress calls, and the RELAY log stores relayed distress calls.

You can reply to any of them with an INDIVIDUAL call back, as follows:

1.Press CALL to display the first three options of the DSC CALL menu.

2.Scroll through the options and move the cursor to DISTRES LOG. Press >ENT.

3.Press >ENT again to select the received distress call log

52

Northstar NS100

 

Page 53
Image 53
NorthStar Navigation Northstar NS100 quick start Receive and reply to a distress call, Call back using the distress logs