3.10Build SIL3132 RAID Floppy Disk Under Windows Environment
This procedure is necessary if you want to install operating system to a RAID configuration connected between “eSATA1” connectors:
1.Prepare a 3.5” floppy disk drive and connect it to “FDC1” connector on this motherboard.
2.Start install operating system.
3.Insert this driver disk into floppy disk drive when the screen instruction prompts you to install a
4.Press <F6> key, and then follow the screen instruction to complete the installation.
To create a driver disk:
1.Click on the [abit Utility] tab in the installation menu screen.
2.Click the [Generate SIL3132 Raid Floppy Disk[32bit]] item. The installation screen appears.
3.Insert one blank floppy disk to the selected floppy drive and click [Build].
4.Click [OK] to finish building the SATA Driver Disk.
5.Click [Exit] to exit this utility.
IN9 32X/IN9 32X |
