Olitec RW400SG manual ¾ Mode - Select the desired wireless mode. The options are

wireless function of the router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance

Note: Some regions may not use 108Mbps Mode since the operation for the wireless interface in 108Mbps Mode is illegal.

¾Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

¾Mode - Select the desired wireless mode. The options are:

•108Mbps (Dynamic) - Super GTM, 802.11g and 802.11b wireless stations can connect to the router.

•108Mbps (Static) - Only Super GTM wireless stations can connect to the router.

•54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the router.

•11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router. Note: The default is "54Mbps (802.11g)", which allows both 802.11g and 802.11b wireless stations to connect to the router.

¾Enable Wireless Router Radio - The wireless radio of this Router can be enabled or disabled to allow wireless stations access. If enabled, wireless stations will be able to access the router, otherwise, wireless stations will not be able to access the router.

¾Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the Wireless Router SSID will broadcast its name (SSID) on the air.

¾Enable Wireless Security – The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the router without encryption. It is strongly recommended that you choose this optional to encrypt your wireless network. The encryption settings described below.

¾Authentication Type - You can select one of the following authentication types:

•WEP - Select WEP authentication type based on 802.11 authentication.

•WPA-PSK/WPA2-PSK - Select WPA/WPA2 authentication type based on pre-shared passphrase.

•WPA /WPA2 - Select WPA/WPA2 authentication type based on Radius Server.

¾Authentication Option - You can select one of the following authentication options:

•When you select WEP as an authentication type you can select following authentication option:

•Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station request.

•Shared Key - Select 802.11 Shared Key authentication.

•Open System - Select 802.11 Open System authentication.

•When you select WPA-PSK/WPA2-PSKfor authentication type you can select

-20 -