Olitec RW400SG manual Dhcp, DHCP Settings

Figure 5-13: The router attached wireless stations

¾MAC Address - The connected wireless station's MAC address

¾Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / AP-UP / WPA / WPA-PSK /WPA2/WPA2-PSK/None

¾Received Packets - packets received by the station

¾Sent Packets - packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.

Note: This page will be refreshed automatically every 5 seconds.

5.6 DHCP

Figure 5-14: the DHCP menu

There are three submenus under the DHCP menu (shown in figure 5-14): DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

5.6.1 DHCP Settings

The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN. The DHCP Server can be configured on the page (shown in figure 5-15):

Figure 5-15: DHCP Settings

- 25 -