Manuals / Olitec / Computer Equipment / Network Router

Olitec RW400SG 4a WAN - 802.1X + Dynamic IP, Click Logout button to end 802.1x authentication

Models: RW400SG

1 65

Download 65 pages 26.65 Kb

Page 19

Figure 5-4a: WAN - 802.1X + Dynamic IP

Figure 5-4a: WAN - 802.1X + Dynamic IP

¾User Name - Enter the user name for 802.1x authentication provided by your ISP

¾Password - Enter the password for 802.1x authentication provided by your ISP. Click Login button to start 802.1x authentication.

Click Logout button to end 802.1x authentication.

2.If you choose Static IP, you should have fixed IP Parameters specified by your ISP. The Static IP settings page will appear, shown in figure 5-5:

Figure 5-5: WAN - Static IP

You should type the following parameters into the spaces provided:

¾IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

¾Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0.

¾Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation provided by your ISP.

¾MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.

¾Primary DNS - (Optional) Enter the DNS address in dotted-decimal notation provided by your ISP.

¾Secondary DNS - (Optional) Type another DNS address in dotted-decimal notation provided by your ISP if provided.

-15 -

Image 19

Olitec RW400SG manual 4a WAN - 802.1X + Dynamic IP, Click Logout button to end 802.1x authentication, 5 WAN - Static IP

Contents

Users Guide RW400SG Router OLITECPage 5.6.1 DHCP Settings Appendix C Specifications 5.11.3 Factory DefaultsAppendix A FAQ Appendix B Configuring the PCsChapter 2 Introduction 2.2 Features2.1 Overview of the Router 2.3.1 The Front Panel 2.3 Panel Layout2.3.2 The Rear Panel 3.1 System Requirements Chapter 3 Connecting the Router3.2 Installation Environment Requirements 3.3 Connecting the RouterTo LAN Switch/HubRESET （XDSL 、Cable 、Ethernet ）4.1 TCP/IP configuration Chapter 4 Quick Installation Guide4.2 Quick Installation Guide If you choose PPPoE, you will see this page shown in figure Figure 4-4 Login WindowsFigure 4-5 Quick Setup Figure 4-6 Choose WAN Connection TypeFigure 4-7 Quick Setup - PPPoE In this page, you can configure the following wireless parameters Radio, SSID, Channel, Mode, Wireless MAC address and IP address Chapter 5 Configuring the Router5.1 login 2. WirelessFigure 5-1 Router Status 5.3 Quick Setup5.4 Network Please refer to Section 4.2 Quick Installation Guide5.4.2 WAN 5.4.1 LANFigure 5-4 WAN - Dynamic IP You should type the following parameters into the spaces provided Click Logout button to end 802.1x authenticationFigure 5-4a WAN - 802.1X + Dynamic IP Figure 5-5 WAN - Static IPFigure 5-6 WAN - PPPoE Click Login to start 802.1x authenticationClick Logout to end 802.1x authentication Figure 5-5a WAN - 802.1X + Static IPFigure 5-7 PPPoE Advanced Settings 5.4.3 MAC Clone 5.5.1 Wireless Settings 5.5 Wireless¾ Mode - Select the desired wireless mode. The options are Encryptions 5.5.2 MAC Filtering Figure 5-12 Add or Modify Wireless MAC Address Filtering entry 5.5.3 Wireless Statistics 5.6 DHCP 5.6.1 DHCP Settings5.6.2 DHCP Clients List To delete all Reserved IP addresses 5.6.3 Address ReservationTo Reserve IP addresses To modify A Reserved IP address5.7.1 Virtual Servers 5.7 ForwardingTo modify a virtual server entry To setup a virtual server entryTo delete a service entry To delete all service entriesFigure 5-20 Port Triggering Once configured, operation is as follows 5.7.3 DMZ Modifying an existing ruleDeleting an existing rule To delete all rules5.7.4 UPnP 5.8.1 Firewall 5.8 Security5.8.2 IP Address Filtering 5.8.3 Domain Filtering Figure 5-28 Add or Modify a Domain Filtering entry Click the Enabled All button to make all entries enabledClick the Disabled All button to make all entries disabled Figure 5-27 Domain Filtering5.8.4 MAC Filtering 5.8.5 Remote Management 5.8.6 Advanced Security Click the Save button to save the settings 1. Modify the entry’s Destination IP Address, Subnet Mask and Gateway 5.9 Static RoutingTo add static routing entries To modify an existing entry5.10.2 Oray.net DDNS 5.10 DDNSTo delete all the entries 5.10.1 Dyndns.org DDNS5.10.3 Comexe.cn DDNS 5.11 System Tools 5.11.2 Firmware 5.11.1 Time5.11.4 Reboot 5.11.3 Factory Defaults5.11.5 Password 5.11.7 Statistics 5.11.6 LogStatistics Table The total amount of packets received and transmitted by the router Click the Refresh button to refresh immediately1. How do I configure the router to access Internet by ADSL users? Appendix A FAQ3. I want to use Netmeeting, what do I need to do? 4. I want to build a WEB Server on the LAN, what should I do? 5. The wireless stations cannot connect to the router 1. Install TCP/IP component Appendix B Configuring the PCs2. Configure TCP/IP for your computer Assigned by DHCP Sever Figure B-6 DNS Configuration tab Setting IP address manuallyFigure B-5 Gateway tab Figure B-8 Gateway tab Figure B-7 IP Address tabclick Add button. Shown below Figure B-9 DNS Configuration tab General Appendix C SpecificationsAppendix D Glossary ¾ Domain Name - A descriptive name for an address or group of addresses on the Internet