Power supply

2Insert size-AAA battery, observing the correct =and -polarities.

3Close the battery cover

completely by pressing to the direction A, then sliding to the direction B.

Notes

Manganese batteries may not be used in this recorder.

When changing batteries, AAA alkaline batteries or Olympus Ni-MH rechargeable batteries are recommended.

Be sure to stop the recorder before

replacing the batteries. Unloading the

1

batteries while the recorder is in use may

cause a malfunction such as corrupting

Power

the file, etc. If you are recording into a file

and the batteries run out, you will loose

 

your currently recorded file because the

supply

crucial to change the batteries once you

file header will not be able to close. It is

 

see only one Hash mark in the battery

 

indicator.

 

If it takes longer than 1 minute to replace the dead batteries or if you take the batteries in and out repeatedly at short intervals, you may have to redo the battery and time settings. In this case, the [Battery] screen will appear. For more details, refer to “Battery settings” (P.12).

Remove the batteries if you are not going to use the recorder for an extended period of time.

When replacing rechargeable batteries, be sure to use Ni-MH rechargeable batteries (optional). The use of other manufacturers' products can damage the recorder and should be avoided.

EN

11