Menu setting method

FM Menu

For WS-710M:

Rec Mode

You can change the recording mode when recording from the FM radio. Select a recording mode to suit your purpose. [PCM]: The recording rate will be

automatically set to [44.1 kHz/16 bit]. [MP3]: The recording rate will be

automatically set to [128 kbps]. [WMA]: The recording rate will be

automatically set to [ST HQ].

Auto-preset

Refer to “Presetting radio stations automatically [Auto-preset]” (☞ P.43).

Scan sense

You change the scan sensitivity when scanning for radio stations with auto preset. Select the sensitivity to suit the reception conditions.

[High]: Receive radio station signals using high sensitivity. You should normally select this setting.

[Low]: Receive radio station signal using reduced sensitivity. Try this setting when there is interference by signals from unwanted stations.

Output

You can change the audio output of the FM radio.

[Earphone]: Output sound from earphones. Sound will not be output from the built-in speaker even if you unplug the earphones.

[Speaker]: Always output sound from builtin speaker. Sound will not be output from earphones even if you plug them in.

•This is different function to [LCD/Sound Menu] of [Speaker]. Irrespective of the [Speaker] setting, in the case that you have set [Output] to [Speaker] when listening to the FM radio, sound from the radio will still be output from the speaker (☞ P.57).

Rearranging files [Replace]

You can move a file in a folder to change the order of playback. First select the folder (file) for which you want to change the playback order.

+− button

90button

OK `/MENU button

1Select the folder for which you would like to rearrange the song order (☞ P.22 to P.24).

2While the recorder is during stop mode, select [Replace] from the menu on the [File Menu].

•For details on how to enter the menu settings, see “Menu setting method” (☞ P.47).

3Press the + or − button to select the file you want to move.

5

method setting Menu

EN

59