Setting time and date [Time & Date]

Changing the time and date

3Press the OK `/MENU or 9 button to move the cursor to the item to set.

While the recorder is during stop mode, press and hold the STOP (4) button to display the [Time & Date] and [Remain]. If the current time and

1

date is not correct, set it using the

procedure below.

date and time Setting

 

 

STOP (4) button

 

+− button

 

90button

 

OK `/MENU

 

button

1While the recorder is during stop mode, press and hold the OK `/MENU button.

•The menu will appear on the display (☞ P.47).

2Press the + or − button to select [Device Menu] tab.

•You can change the menu display by moving the settings tab cursor.

•[Device Menu] will appear on the display.

4Press the + or − button to select [Time & Date].

5Press the OK `/MENU or 9 button.

•[Time & Date] will appear on the display.

•The “Hour” will flash on the display, indicating the start of the Time and Date setup process.

The following steps are the same as Step 1 through Step 3 of “Setting time and date [Time & Date]” (☞ P.17).

6Press the STOP (4) button to close the menu screen.

EN

18