Power supply

1

supply Power

Battery settings

Select to match the battery you are using.

1Replace the battery and switch on the recorder.

2Press the + or − button to change the setting.

Battery type

[Ni-MH] (õ):

Select when using the Olympus Ni-MH rechargeable battery (BR401).

[Alkaline] (ú):

Select when using a commercially available alkaline battery.

3Press the OK `/MENU button to complete the setting.

•If the “Hour” indicator flashes in the display, see “Setting time and date [Time & Date]” (☞ P.17).

Note

•When playing a voice/music file, the recorder may be reset due to the reduction of the voltage output of the

batteries depending on the volume level even if [º] is displayed in the battery indicator. In this case, lower the volume of the recorder.

Charging by connecting to a computer via USB

For WS-710M/WS-700M:

You can charge the batteries by connecting to a PC's USB port. When charging, be sure to correctly place the rechargeable batteries (supplied) into the recorder (☞ P.10).

Do not charge primary batteries such as alkaline or lithium batteries.It may cause battery leakage heating and recorder malfunction.

EN

Battery indicator

The battery indicator on the display changes as the batteries loose power.

•When [æ] appears on the display, replace the batteries as soon as

possible. When the batteries are too weak, [s] and [Battery Low] appears on the display and the recorder shuts down.

1Boot the PC.

2Slide the USB connector slide lever in the direction indicated by the arrow to eject the USB connector out of the recorder.

12