Setting time and date [Time & Date]
If you set the time and date beforehand, the information when the file is recorded is automatically stored for each file. Setting the time and date beforehand enables easier file management.
When you use the recorder for the first time after purchasing it, or when the batteries have been inserted without the device having been used in a long time, the [Set Time & Date] will appear. When the “Hour” is flashing, conduct the setup from Step 1.
+− button
90button
OK `/MENU button
LIST button
2Press the + or − button to set.
•Follow the same steps by pressing the 9or 0button to select the next item, and press the + or − button to set.
•You can select between 12 and 24 hour display by pressing the LIST button while setting the hour and minute.
Example: 10:38 P.M
10:38 PM22:38 (Initial setting)
•You can select the order of the “Month”, “Day” and “Year” by pressing the LIST button while setting them.
Example: July 15, 2010
7M 15D 2010Y (Initial setting)
15D 7M 2010Y
2010Y 7M 15D
3Press the OK `/MENU button to complete the setting.
1
date and time Setting
1Press the 9or 0button to select the item to set.
•Select the item from the “Hour”,
“Minute”, “Year”, “Month” and “Day” with a flashing point.
•The clock will start from the set date and time. Press the OK `/MENU button according to the time signal.
Note
• If you press the OK `/MENU button during the setup operation, the recorder
will save the items that were set to that EN point.
17