
Recording
Listening while audio is recorded
If you start recording after inserting the earphone into the EAR jack on the recorder, you can hear the sound being recorded. The recording monitor volume can be adjusted by pressing the + or − button.
Connect the earphone to the EAR jack on the recorder.
•After recording has started, you can hear the sound being recorded through the earphone.
To EAR jack
Changing the recording scene [Rec Scene]
You can easily change the recording settings by selecting the scene which best matches your usage (☞ P.47, P.52).
+− button
OK `/MENU button
SCENE/INDEX button
1While the recorder is during stop mode, press and hold the SCENE/INDEX button.
2Press the + or − button to select [Rec Scene].
2
Recording
Notes
•Recording level cannot be controlled using the volume button.
•When using the earphones, do NOT set the volume too high. Listening at very high volume may lead to hearing loss.
•Do not place earphones near a microphone as this may cause feedback.
•When the external speaker is connected while recording, there is a risk that audio feedback will occur.
3Press the OK `/MENU button.
4Press the + or − button to select the recording scene.
5 Press the OK `/MENU button. | EN |
|
27