Connecting to your PC

1Boot the PC.

2Slide the USB connector slide lever in the direction indicated by the arrow to eject the USB connector out of the recorder.

3Make sure that the recorder is stopped, and connect to the PC’s USB port.

Windows:

When you open [My Computer], it will be recognized by the drive name of the product name.

Macintosh:

When you connect the recorder to a Mac OS, it will be recognized by the drive name of the product name on the desktop.

•[Remote (Storage)] is appeared on recorder if the USB cable is connected.

For WS-710M,

WS-700M only

For WS-600S only

Notes

•Refer to the user’s manual for your PC regarding the USB port on your PC.

•Be sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.

•Use the supplied USB extension cable depending on situations.

•When connecting the recorder through an USB hub the operation may become unstable. In such cases, refrain from using a USB hub.

•Do not use USB extension cables other than the supplied cable.

Using cables from other manufacturers could result in damage to the recorder. Do not use the supplied USB extension cable with devices from other manufacturers.

6

PC your to Connecting

EN

67