Inserting and ejecting a microSD card

Notes

•It is possible to switch the recording media over to the built-in memory (☞ P.47, P.57 ).

•In some cases microSD card which have been formatted (initialized) by another device, such as a computer, cannot be

1 recognized. Be sure to format them with this recorder before using (☞ P.63).

Inserting

Ejecting a microSD card

 

 

While the recorder is during stop

and

1

 

mode, open the card cover.

cardmicroSDaejecting

 

Push the microSD card inward to

2

 

unlock it, and let it eject partially.

•The microSD card is visibly out of the slot and can be removed safely.

•If you eject the microSD card when the memory is selected to [microSD Card], it will automatically changed to [Built-in Memory Selected].

3Close the card cover securely.

Notes

•Releasing your finger quickly after pushing the microSD card inward may cause it to eject forcefully out of the slot.

•Before inserting the microSD card, turn off the write protection function. Check the Olympus website regarding microSD cards which are confirmed operation with this recorder.

•This recorder may not recognize correctly on some microSD cards which are not compatible with this recorder.

•In the case when the microSD card cannot be recognized, remove the microSD card then put it in again to see if this recorder recognizes the microSD card.

•The processing performance reduces in a microSD card when you repeat writing and delete. In this case, format the microSD card (☞ P.63).

EN

20