Installing Batteries

1

2

3

AAAalkaline batteries1Lightly press down on the arrow and slide the battery cover open.2Insert two AAA batteries, observing the correct polarity.3Close the battery cover completely.Replacing batteries

The battery indicator on the display changes as the batteries lose power.

→ → →

When appears on the display, replace the batteries as soon as possible.

When the batteries are too weak, the recorder shuts down and “BATTERY LOW” appears on the display.

1

Batteries Installing

..............................................................................................................................................................

Notes

•Be sure to turn OFF the recorder before replacing the batteries. Removing the batteries while the recorder is in use may corrupt the card. If you are recording into a file and the batteries run out, you will lose your currently recorded file since the file header will not be written. It is crucial to replace the batteries when one hash mark in shown in the battery icon.

•Be sure to replace both batteries at the same time.

•Never mix old and new batteries, or batteries of different types and/or brands.

•If it takes longer than 1 minute to replace dead batteries, you may have to reset the time when you load new batteries.

•Remove the batteries if you are not going to use the recorder for an extended period of time.

13