Notes on Recording For Voice Recognition

When recording voice to be processed with voice recognition, set up your DSS recorder as follows to improve recognition accuracy.

•Set the microphone sensitivity to “DICT.” (☞ P.27).

•Set the recording mode to “SP” (☞ P.28).

•Set the Variable Control Voice Actuator (VCVA) to “OFF” (☞ P.29).

•Register/enroll your voice in the voice recognition software using the recorder.

•Record in a relatively quiet environment.

•Have the recorder microphone 5 to 10 cm (2 to 4 inches) away from your chin.

•Speak normally.

•It is recommended to use the noise- cancellation microphone, ME12, when recording.

Dictation files recorded under the following conditions cannot be processed by voice recognition because their recognition accuracy rates will be very low.

•A conference or meeting where many voices are recorded.

•Seminar or lecture where high-level ambient noise tends to be recorded.

5

Voice Using Software Recognition (Optional)

71