Inserting and Ejecting a Card

Inserting a Card

1

2

1Slide the card cover lock in the direction indicated by the arrow.

The card cover is unlocked and the message “CARD COVER IS OPEN” appears on the display. When this message appears, the power is switched off automatically.

2Face the card the correct way and insert it into the card slot as shown in the diagram.

•Insert the card keeping it straight.

•The card stops with a click when it is inserted all the way.

•Inserting the card the wrong way or at an angle could damage the contact area or cause the card to jam.

•If the card is not inserted all the way, data may not be written to the card.

3Close the card cover securely.

1

and Inserting

a Ejecting

Card

3

Card inserted fully into the slot

The message “PLEASE WAIT” on the display flashes for

 

seconds.

 

Card not inserted fully into the slot

 

When the card cover is closed, the message “INSERT

 

CARD” on the display flashes for a few seconds. Pressing

 

any button will sound beeps* and flash the message

 

“INSERT CARD” again.

* When the system sounds are enabled.

..............................................................................................................................................................

Notes

•If an unformatted card is inserted, the recorder automatically displays the menu to menu format option (☞ P.47).

•Never use any card in the recorder unless it has been formatted on this unit or on a CAMEDIA series Olympus

digital camera (☞ P.47).

21