Manuals / Brands / Computer Equipment / Microcassette Recorder / Olympus / Computer Equipment / Microcassette Recorder

Olympus LS-11 Power Supply, HOLD, position, Exit HOLD mode, Turning On the Power:, Turning Off the Power:, Set the recorder to HOLD mode, Power save mode [AutoPowerOff]

1 86

Download 86 pages, 3.83 Mb

Power Supply

When the recorder is not being used, turn the power off to reduce battery consumption to a minimum. Even if the power is turned off, existing data, mode settings, and clock settings will be maintained.

Turning On the Power:

While the recorder’s power is off, slide the POWER/HOLD switch in the direction indicated by the arrow.

•The display will turn on, and the power will be turned on.

•The resume function will bring the recorder back to the stop position in memory before power was turned off.

•When the batteries are removed from the recorder the resume function’s stopped position will be erased.

Turning Off the Power:

Slide the POWER/HOLD switch in the direction indicated by the arrow for 1 second or longer.

•The display shuts off and the power will be turned off.

•The resume function remembers the stop position before the power is turned off.

Power save mode [AutoPowerOff]

If the recorder is stopped/not used for over 10 minutes (initial setting) while the power is turned on, the power will be turned off (☞ P.41, P.47).

•If any button is pressed prior to the battery turning off, the elapsed time count will start over again until this function takes effect.

HOLD

If you bring the recorder is set to HOLD mode, the current conditions will be preserved, and all buttons will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket.

	Set the recorder to HOLD mode
	Slide the POWER/HOLD switch to the [HOLD]	1
	position.	StartedGetting
	• After [Hold] appears on the display, the
	recorder is set to HOLD mode.
	recorder is set to HOLD mode.

Exit HOLD modeSlide the POWER/HOLD switch to the A position.

13

Contents

Page Introduction INDEX Table of Contents Introduction Getting Started About Recording About Playback 6 Other Information Safe and Proper Usage <Warning regarding data loss Safe and Proper Usage fWarning Do not attempt to recharge alkaline, lithium or any other •Never use any battery with a torn or cracked outer cover •Keep batteries out of the reach of children Getting Started Main Features Identification of Parts Identification of Parts Folder List Display File List Display File Display Inserting Batteries fWarning Power Supply HOLD HOLD Setting Time and Date [Time & Date] Setting Time and Date [Time & Date] 1 While the recorder is during stop mode, press the MENU button 3 Press the `/OK or 9button to move the cursor to the item to set 4 Press the 2or 3button to select [Time & Date] 5 Press the `/OK or 9 button Inserting and Ejecting a Card Inserting and Ejecting a Card 2 Push the card inward to unlock it, and let it eject partially About the SD Card Notes on the Folders Notes on the Folders Selecting the Folders and Files About Recording Before Recording Recording Actually producing the sound you would like to record: 4 Press the REC s button again will begin recording 5 Press the STOP 4 button to stop re- cording Pause While the recorder is during recording mode, press the REC s button Resume Recording: Press the REC s button again While the recorder is during recording mode, press the `/OK button Recommended settings by recording condition Listening While Audio is Recorded Connect the earphone to the EAR jack on [ON] or [OFF] the recorder Slide the MIC SENSE HIGH/LOW switch and select [HIGH] or [LOW] Page Press the REC sbutton and prepare to 2 record 3 Press the 9or 0button to adjust the voice sync level 5 Recording stops automatically About Recording from External Microphone or Other Devices Recording with External Microphone: Recording the Sound of Other Devices with This Recorder: Recording the Sound of This Recorder with Other Devices: About Playback Playback Playback Settings relating to playback About music file Forwarding While the recorder is during stop mode in the file display, press and hold the 9button While the recorder is during playback mode, press and hold the 9 button Rewinding Page Clearing an index mark or a temp mark: Pressing any of the following buttons will release the segment repeat playback A Press the STOP 4 button BPress the `/OK button CPress the 9 button DPress the 0 button Erasing Partially erase a file At the position you want to end partial 6 erase, press the ERASE button again Menu Setting Menu Setting Method Menu Setting Method Press the 2or 3button to change the 6 setting Press the `/OK button to complete the 7 setting Rec Mode Rec Level Zoom Mic Rec Monitor Plug-inPower V-Sync.Rec Play Mode Reverb EUPHONY Backlight Contrast LED Language MemorySelect Lock Replace File Move File Divide AutoPowerOff Fn Setting Menu Reset System Info Property hSetting menu during recording hSetting menu during playback Tab Function Setting Formatting the Recorder [Format] 3 the cursor to the item to set Press the `/OK or 9button to move 4 [Format] 2 [Memory Menu] tab 7 Press the `/OK button.11 Press the `/OK button Press the 2 button to select [Start] 9 Press the `/OK button 10Press the 2 button again to select [Start] Page 4 the cursor to the item to set 5 Press the 2 or 3 button to select [Replace] 2 While the recorder is during stop mode, press the MENU button 3 Press the 2 or 3 button to select [Others] tab 6 Press the `/OK or 9 button 8 Press the `/OK or 9 button 9 Press the 2 or 3 button to select the location to move it to 10Press the `/OK button to complete the setting 11 Press the MENU button to close the menu screen Menu Setting Method] 4 [Others] tab 1 Select the folder where the file you want to move or copy is saved 5 Press the `/OK or 9button to move the cursor to the item to set 6 Press the 2 or 3 button to select [File Move] Press the `/OK or 9 button 10folder you want to move or copy the file to Press the 2or 3button to choose the 8 position to move or copy the file to Page 3 [Others] tab 4 Press the `/OK or 9button to move the cursor to the item to set 5 Press the 2or 3button to select [File Divide] 7 Press the 2or 3button to select [File 9 Press the MENU button to close the menu screen Using the Recorder on Your PC Operating Environment Connecting to Your PC Connecting to Your PC Click ] on the task bar located at Device] 2 When the safe to remove hardware window appears, click [OK] Transfer the Voice Files to Your PC Using Windows Media Player Insert CD into the CD-ROM drive, and start Windows Media Player Using Windows Media Player 2 From the Features taskbar, click [Rip] menu Connect the recorder to a PC, and 1 start Windows Media Player From the Features taskbar, click [Sync] 3 Click [Sync] menu again to select [DVR] 5 Click [Start Sync] Click [ ] on the upper right corner 5 and set the synchronization options Insert the blank CD-R/RWinto the CD-R/RWdrive, and start Windows Media Player 2 the [Burn] menu Select the desired category from [Burn] menu Put a check mark on the voice 3 files that you want to copy Using iTunes Insert the CD into the CD-ROM drive, and start iTunes Click [iTunes] {[Preferences] Click [Advanced] tag Click [Importing] to set the file Connect the recorder to a PC, and start iTunes Selecttheplaylisttobetransferred 2 to the recorder, and put the check marks on the music files that you want to transfer Insert the CD-R/RW into the CD- R/RW drive, and start iTunes 3 Click [Burn Disc] 4 To set the CD format for copying voice files to CD-R/RW,and click [OK] Using as External Memory of the PC Other Information Alarm Message List Troubleshooting Troubleshooting Technical Assistance and Support Accessories (optional) Specifications Specifications Guide to recording times Guide to battery life Declaration of Conformity Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Canadian RFI