Recording

•When remaining recording time is less than 60 seconds, the [PEAK] indicator light starts flashing in amber. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.

•[Folder Full] will appear when the folder capacity is full. Delete any unnecessary files before recording any further (☞ P.38).

•[Memory Full] will appear when the memory is full. Change the recordable media or de- lete any unnecessary files before recording any further (☞ P.38, P.41, P.46).

•When the recording button of the exclusive remote control RS30W (optional) is pressed once, recording will start immediately.

•Depending on the sound recording mode and the status of record media, the data transfer to the media cannot be done in time during recording and the skipped sound may be recorded. In this case, [Data Write Error] will appear during recording or when the recording is finished. After transferring the data to the PC, format the record media.

•We recommend the media to be formatted before recording.

PauseWhile the recorder is during recording mode, press the REC s button.

• [

] will appear on the display.

•The recorder will time out after 60 minutes when left in "Rec Pause".

Resume Recording:Press the REC s button again.

•Recording will resume at the point of interruption.

To quickly check on the recorded contents

While the recorder is during recording mode, press the `/OK button.

2

Recording About

•[] will appear on the display.

•Stop recording and the file that was just recorded will be played back.

25