Recording

2

Recording About

[HIGH]:

This is a highly sensitive mode which can record surrounding noises.

[LOW]:

This is the standard level of microphone

sensitivity. Select this mode for cases where the volume of the source sound is high, such as a band performance.

Note

•When you would like to clearly record a speaker’s voice, set the recorder to [LOW] and hold its built-in stereo microphone close to the speaker’s mouth (5-10 cm) before recording.

Adjusting the voice sync level for recording

Voice sync recording allows you to start recording when voice louder than the voice sync level (detection level) is de- tected, and automatically stop recording when the voice becomes quiet. When voice sync recording is on (☞P.44) and the voice is below the voice sync level (detec- tion level) for longer than the specified detection time, the recorder stops.

REC s button STOP 4 button 9 0 button

1 Select the recording folder (☞ P.19 to

P.21).

How to change folders:

1 Pressing the LIST button at the file display while stopped will return you back one layer above.

Pressing the LIST button repeatedly will bring you to the folder list display.

2 Pressing button 2 or 3 at the folder list display will select the folders for voice recordings.

•Newly recorded audio will be saved as the last file in the selected folder.

28