Manuals / Brands / Computer Equipment / Microcassette Recorder / Olympus / Computer Equipment / Microcassette Recorder

Olympus LS-11 Transfer the Voice Files to Your PC, Windows, SD card, Macintosh, 4 Copy the data, 3 Copy the data, Built-inflash memory, 3 Open the [LS_11] folder

1 86

Download 86 pages, 3.83 Mb

Transfer the Voice Files to Your PC

The 5 voice folders of this recorder are appeared as [DSS_FLDA], [DSS_FLDB], [DSS_FLDC], [DSS_FLDD] and [DSS_FLDE], and the recorded voice files are saved in these folders.

4Drive name and folder name when apersonal computer is connected:Built-in flash memory

Windows

1 Connecting the recorder to your PC (☞ P.62).2 Open the Explorer window.3 Open the [LS_11] folder.

Drive name

LS_11

Folder name

DSS_FLDA DSS_FLDB DSS_FLDC DSS_FLDD

DSS_FLDE

Folder A

Folder B

Folder C

Folder D

Folder E

• When you open [My Computer], it will

be recognized by the drive name [LS_11]

(Built-in flash memory) and [Removable

Disk] (SD card) (The drive letter will differ

depending on the PC being used).

Music

5

PC Your on Recorder the Using

4 Copy the data.5 Disconnecting the recorder to your PC (☞ P.63).

Macintosh

1 Connecting the recorder to your PC (☞ P.62).

• When you connect the recorder to a Mac

OS, it will be recognized by the drive name

[LS_11] on the desktop. When an SD card

is inserted it will be recognized by the drive

name [Untitled].

SD card

Drive name

Removable

Disk

Windows

Untitled

Macintosh

Folder name

DSS_FLDA

DSS_FLDB

DSS_FLDC

DSS_FLDD

DSS_FLDE

Music

Folder A

Folder B

Folder C

Folder D

Folder E

64

2 Double-click on [LS_11] icon on the desktop.3 Copy the data.4 Disconnecting the recorder to your PC (☞ P.63).

Notes

•While transmitting data, [Busy] is appeared, and the [PEAK] indicator light flashes. NEVER disconnect the USB while the [PEAK] indicator light is flashing. If you do, the data will be destroyed.

•In the Windows operational environment 24 bit WAV format files cannot be played back.

•When a sound board of your PC does not support to 24 bit, the recorder cannot play the software supporting to 24 bit correctly.

•In the Mac OS operational environment, WMA format files cannot be played back.

Contents

Page Introduction INDEX Table of Contents Introduction Getting Started About Recording About Playback 6 Other Information Safe and Proper Usage <Warning regarding data loss Safe and Proper Usage fWarning Do not attempt to recharge alkaline, lithium or any other •Never use any battery with a torn or cracked outer cover •Keep batteries out of the reach of children Getting Started Main Features Identification of Parts Identification of Parts Folder List Display File List Display File Display Inserting Batteries fWarning Power Supply HOLD HOLD Setting Time and Date [Time & Date] Setting Time and Date [Time & Date] 1 While the recorder is during stop mode, press the MENU button 3 Press the `/OK or 9button to move the cursor to the item to set 4 Press the 2or 3button to select [Time & Date] 5 Press the `/OK or 9 button Inserting and Ejecting a Card Inserting and Ejecting a Card 2 Push the card inward to unlock it, and let it eject partially About the SD Card Notes on the Folders Notes on the Folders Selecting the Folders and Files About Recording Before Recording Recording Actually producing the sound you would like to record: 4 Press the REC s button again will begin recording 5 Press the STOP 4 button to stop re- cording Pause While the recorder is during recording mode, press the REC s button Resume Recording: Press the REC s button again While the recorder is during recording mode, press the `/OK button Recommended settings by recording condition Listening While Audio is Recorded Connect the earphone to the EAR jack on [ON] or [OFF] the recorder Slide the MIC SENSE HIGH/LOW switch and select [HIGH] or [LOW] Page Press the REC sbutton and prepare to 2 record 3 Press the 9or 0button to adjust the voice sync level 5 Recording stops automatically About Recording from External Microphone or Other Devices Recording with External Microphone: Recording the Sound of Other Devices with This Recorder: Recording the Sound of This Recorder with Other Devices: About Playback Playback Playback Settings relating to playback About music file Forwarding While the recorder is during stop mode in the file display, press and hold the 9button While the recorder is during playback mode, press and hold the 9 button Rewinding Page Clearing an index mark or a temp mark: Pressing any of the following buttons will release the segment repeat playback A Press the STOP 4 button BPress the `/OK button CPress the 9 button DPress the 0 button Erasing Partially erase a file At the position you want to end partial 6 erase, press the ERASE button again Menu Setting Menu Setting Method Menu Setting Method Press the 2or 3button to change the 6 setting Press the `/OK button to complete the 7 setting Rec Mode Rec Level Zoom Mic Rec Monitor Plug-inPower V-Sync.Rec Play Mode Reverb EUPHONY Backlight Contrast LED Language MemorySelect Lock Replace File Move File Divide AutoPowerOff Fn Setting Menu Reset System Info Property hSetting menu during recording hSetting menu during playback Tab Function Setting Formatting the Recorder [Format] 3 the cursor to the item to set Press the `/OK or 9button to move 4 [Format] 2 [Memory Menu] tab 7 Press the `/OK button.11 Press the `/OK button Press the 2 button to select [Start] 9 Press the `/OK button 10Press the 2 button again to select [Start] Page 4 the cursor to the item to set 5 Press the 2 or 3 button to select [Replace] 2 While the recorder is during stop mode, press the MENU button 3 Press the 2 or 3 button to select [Others] tab 6 Press the `/OK or 9 button 8 Press the `/OK or 9 button 9 Press the 2 or 3 button to select the location to move it to 10Press the `/OK button to complete the setting 11 Press the MENU button to close the menu screen Menu Setting Method] 4 [Others] tab 1 Select the folder where the file you want to move or copy is saved 5 Press the `/OK or 9button to move the cursor to the item to set 6 Press the 2 or 3 button to select [File Move] Press the `/OK or 9 button 10folder you want to move or copy the file to Press the 2or 3button to choose the 8 position to move or copy the file to Page 3 [Others] tab 4 Press the `/OK or 9button to move the cursor to the item to set 5 Press the 2or 3button to select [File Divide] 7 Press the 2or 3button to select [File 9 Press the MENU button to close the menu screen Using the Recorder on Your PC Operating Environment Connecting to Your PC Connecting to Your PC Click ] on the task bar located at Device] 2 When the safe to remove hardware window appears, click [OK] Transfer the Voice Files to Your PC Using Windows Media Player Insert CD into the CD-ROM drive, and start Windows Media Player Using Windows Media Player 2 From the Features taskbar, click [Rip] menu Connect the recorder to a PC, and 1 start Windows Media Player From the Features taskbar, click [Sync] 3 Click [Sync] menu again to select [DVR] 5 Click [Start Sync] Click [ ] on the upper right corner 5 and set the synchronization options Insert the blank CD-R/RWinto the CD-R/RWdrive, and start Windows Media Player 2 the [Burn] menu Select the desired category from [Burn] menu Put a check mark on the voice 3 files that you want to copy Using iTunes Insert the CD into the CD-ROM drive, and start iTunes Click [iTunes] {[Preferences] Click [Advanced] tag Click [Importing] to set the file Connect the recorder to a PC, and start iTunes Selecttheplaylisttobetransferred 2 to the recorder, and put the check marks on the music files that you want to transfer Insert the CD-R/RW into the CD- R/RW drive, and start iTunes 3 Click [Burn Disc] 4 To set the CD format for copying voice files to CD-R/RW,and click [OK] Using as External Memory of the PC Other Information Alarm Message List Troubleshooting Troubleshooting Technical Assistance and Support Accessories (optional) Specifications Specifications Guide to recording times Guide to battery life Declaration of Conformity Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Canadian RFI