Setting Time and Date [Time & Date]

If you set the time and date beforehand, the information when the file is recorded is automatically stored for each file. Setting the time and date beforehand enables easier file management.

When you use the recorder for the first time after purchasing it, or when the batteries have been inserted without the device having been used in a long time, the [Set Time & Date] will appear. When the “hour” is flash- ing, conduct the setup from Step 1.

2 3 button

9 0 button `/OK button

LIST button

1 Press the 9or 0button to select the item to set.

Select the item from the “hour”, “minute”, “year “month” and “day” with a flashing point

2 Press the 2 or 3 button to set.

•Follow the same steps by pressing the 9 or 0 button to select the next item, and press the 2 or 3 button to set.

•You can select between 12 and 24 hour display by pressing the LIST button while setting the hour and minute.

Example: 10:38 P.M

10:38 PM22:38 (Initial setting)

•You can select the order of the “year”, “month”, “day” by pressing the LIST button while setting them.

Example: January 1, 2009

1M 1D 2009Y (Initial setting)

1D 1M 2009Y

2009Y 1M 1D

3 Press the `/OK button to complete the setting.

•The clock will start from the set date and time. Press the `/OK button according to the time signal.

1

Started Getting

15