Recording

Before starting recording, select a folder between [A] to [E]. These five folders can be selectively used to distinguish the kind of recording; for ex- ample, Folder [A] might be used to store private information, while Folder [B] might be dedicated to holding business information.

REC s button STOP 4 button `/OK button

1 Select the recording folder (☞ P.19 toP.21).

How to change folders:

1 Pressing the LIST button at the file display while stopped will return you back one layer above.

Pressing the LIST button repeatedly will bring you to the folder list display.

2 Pressing button 2 or 3 at the folder list display will select the folders for voice recordings.

•Newly recorded audio will be saved as the last file in the selected folder.

2 Press the REC sbutton and prepare to record.

•Turn the microphone in the direction of the source to be recorded.

A Remaining recording time

B Level meter (change according to the recording level and recording function settings)

C Recording mode

A

B

C

•The recording indicator light will flash and

[ ] will appear on the display.

•The voice sync level can be set when voice sync recording is on.

•[Rec Mode] cannot be changed in the recording standby mode or while recording. Configure this while the recorder is stopped (☞ P.41, P.43).

•The various functions related to recording can be configured to suit the recording conditions (☞ P.41, P.43, P.44).

•The level indicator position of the level meter will change in accordance with the switching of the various settings related to recording. Confirm the recording level through the level meter after switching the settings.

3 Use the REC LEVEL dial to adjust the recording level.

This can be adjusted in a range from [0] to [10]. The larger the number on the dial is the higher the recording level will be, and the indicator position of the level meter will grow larger as well

•This recorder is designed to be able to record cleanly and evenly, even in record- ing conditions such as when the volume of the source sound changes significantly. However, even higher sound quality record- ings can be achieved by adjusting the recording level manually.

•If too big sound is input, the noise may occur even if [Rec Level] is set to [Auto] or [Limiter On]. Also, in certain cases the [PEAK] indicator light, which notifies large input, may not light. To ensure successful recordings, we recommend that you test the record function and volume before use.

•When [Rec Level] is set to [Auto] the record- ing level will be adjusted automatically. Set [Rec Level] to [Manual] when using the recording level adjustment function and the limiter function (☞ P.41, P.43).

2

Recording About

23