3

Playback About

 

 

 

 

Erasing

 

 

 

 

 

5

Press the ERASE button again.

 

 

 

 

Notes

 

• [Partial Erase Start Position] and [Partial

•

Partial erase is not applicable to files recorded

 

Erase End Position] on the display flash

 

alternately. When the lights are flashing,

 

in the WMA or MP3 formats.

 

playback continues and you can rewind or

•

The File Created Date will not change even if

 

fast-forward as usual and fast-forward to

 

the file is partially erased.

 

the end of erase. If the file reaches the end

•

An erased file cannot be restored. When an

 

during the flashing of the lights, that will be

 

SD Card is inserted in the recorder, be sure to

 

the position where erase ends.

 

confirm the recording media as either [Built-

 

 

 

in Memory] or [SD Card] so that there is no

 

 

 

mistake (☞ P.41, P.46).

 

 

• When attempting to perform operations such as

 

 

 

rewriting the contents of an SD Card in cases

 

 

 

where the card has been write protected, [SD

 

 

 

Card Locked] will appear. The playback opera-

 

 

 

tion can be performed, but the write protection

 

 

 

must first be turned off when overwriting the

 

 

 

contents on the card (☞ P.18).

 

 

•

The locked files and files set as read-only

 

At the position you want to end partial

 

cannot be erased (☞ P.41, P.47).

6 erase, press the ERASE button again.

• If an action is not selected within 8 seconds,

 

the recorder will return to stop status.

 

• The display will switch to [Partial Erasing !]

 

 

• Never perform operations such as the following

 

and start the partial erase. The deletion is

 

 

while processing, as they may damage the

 

completed when [Partial erase completed]

 

 

 

data. In addition, replace the batteries with two

 

is displayed.

 

 

 

new ones in order to ensure that the batteries

 

• Playback will stop at the end location of the

 

 

 

will not run out while processing.

 

partial erase.

 

 

 

1Turning off the power while processing.

 

 

 

 

 

 

2Removing the batteries while processing.

 

 

 

3Remove the SD Card during processing

 

 

 

when [SD Card] is being used as the record-

 

 

 

ing media.

 

 

 

Performing any of these operations may dam-

 

 

 

age the data.

 

 

•

You cannot delete folders through the re-

 

 

 

corder.

40