Olympus LS-11 [Others] tab, 6 menu screen, 5 Press the `/OK or 9 button, Press the 2 or 3 button to select, Press the MENU button to close the

Setting Time and Date [Time & Date]

1

Started Getting

Note

•If you press the `/OK button during the setup operation, the recorder will save the items that were set to that point.

Changing the Time and Date

While the recorder is during stop mode, press and hold the STOP 4 button to display the Time and Date, Remaining Memory and File Format.

If the Time and Date is not correct, set it using the procedure below.

2 3 button

9 0 button `/OK button

MENU button

LIST button

1 While the recorder is during stop mode, press the MENU button.

•The menu will appear on the display (☞ P.41).

3 Press the `/OK or 9button to move the cursor to the item to set.

[Others] will appear on the display

4 Press the 2or 3button to select [Time & Date].

[Time & Date] will appear on the display

5 Press the `/OK or 9 button.

•The “hour” will flash on the display, indicat- ing the start of the Time and Date setup process.

The following steps are the same as Step 1

through Step 3 of “Setting Time and Date [Time

&Date]” (☞ P.15).

2	Press the 2 or 3 button to select	Press the MENU button to close the
	[Others] tab.	6 menu screen.

• You can change the menu display by moving the settings tab cursor.

16