Menu Setting Method

 

 

 

 

 

 

 

 

 

 

 

 

4Rec Menu (Continued)

 

 

 

 

 

 

 

 

Rec Monitor

 

Select whether or not to output audio while recording from the earphone jack.

 

 

 

 

Setting:

 

 

 

 

[On]: Enables the recording monitor function. Sound will be output from the

 

 

 

 

EAR jack.

 

 

 

 

[Off]: Disables this function. Sound will not be output from the EAR jack.

 

 

 

 

• When the external speaker is connected while recording, there is a risk that audio

 

 

 

 

feedback will occur. It is recommended that you use earphones for the recording

 

 

 

 

monitor, or turn [Rec Monitor] to [Off] while recording (☞ P.27).

 

 

 

 

• When [Rec Monitor] is set to [Off] no sound will come out of the earphones while you are

 

 

 

 

recording (☞ P.27).

 

 

 

 

 

 

 

Plug-inPower

 

External microphones which are supported by plug in power can also be used. Whether

4

 

 

 

or not to supply power to external microphones can be configured.

 

 

 

Setting:

Menu

 

 

[On]: When the plug-in power function is activated, power will be supplied to

 

 

the connected external microphone. Select this when external microphones

 

 

supported by plug-in power are connected (☞ P.30).

Setting

 

 

[Off]: Disables this function. Select this when external microphones not supported

 

 

• Turn the plug-in power function to [Off] when an external microphone not supported

 

 

 

 

by plug-in power are connected.

 

 

 

 

by plug-in power is connected, as there is the risk that noise may be generated while

 

 

 

 

recording.

 

 

 

 

• Phantom power cannot be supplied, even when the plug in power function is set to [On].

 

 

 

 

 

 

 

V-Sync. Rec

 

Voice sync recording starts when a voice louder than the voice sync level (detection

 

 

 

 

level) is detected. When the voice becomes quiet, recording is automatically stopped.

 

 

 

 

When voice sync recording is on and the voice is below the voice sync level (detection

 

 

 

 

level) for longer than the specified detection time, the recorder stops.

 

 

 

 

Setting:

 

 

 

 

[On]: [1 second] [2 seconds] [3 seconds] [4 seconds] [5 seconds] [10 seconds]:

 

 

 

 

Sets the detection time. If the input (recording level) is equal to or below

 

 

 

 

the specified level for longer than the specified detection time, the recorder

 

 

 

 

stops.

 

 

 

 

[Off]: Disables this function.

 

 

 

 

 

44