E-14
Note:•
When the set time (initial setting: 3 minutes) passes without any
operation while the digital camera is installed in shooting mode,
the camera enters into sleep mode (standby status) and the
operation stops.
To cancel sleep mode (return to operation status), press the
shutter button or any other button.
For details, refer to the instruction manual for the digital camera.
3)Make sure that the extremity of the
power switch slide lever fits into the
power switch of the camera.
4) Turn the power switch dial knob to turn
the camera ON/OFF.
(The power switch slide lever functions
according to the operation of the power
switch dial knob.)

C-770 Ultra Zoom

1)Turn the power switch button
counterclockwise until it clicks.
Tip of power switch
slide lever
2)Before closing the rear lid of the case,
turn the power switch dial knob
counterclockwise so that the index on
the power switch slide lever (located
on the inner side of the case) comes
on the OFF position.