E-20

Check the operation of the camera.

Confirm the operation according to the instruction manual for the digital camera.

Load the digital camera.

Open the Case.

Insert the buckle opener of the accessory into the buckle opening lever
as shown in the figure (in direction ) Pull the buckle opener slowly (in
direction ). When not using the buckle opener, hold the buckle opening
lever with your thumb and index finger from the side and pull it up slowly.
Quietly load the digital camera into the
Case, taking care that the projecting
part of the zoom lever of the digital
camera properly fits into the recessed
part of the zoom lever of the Case.

Pull up the mode dial of the case.

Pull up the mode dial of the case until it
stops, so that it does not interfere with the
mode dial of the digital camera.
:•
Make sure that the flash is closed when loading the
digital camera.
•
Confirm that the projecting part of the zoom lever of the
digital camera is set securely to the zoom lever notch on
the inside of the case. When the setting is not secure,
the loading of the digital camera is not complete and
closing of the rear lid of the case may not be possible or
zoom does not function even when the zoom lever is
operated, so that caution is required.
Insufficient sealing will cause water leakage.
CAUTION