2. Advance Check of the Case

Advance test before use

This Case has been the subject of thorough quality control for the parts during the manufacturing process and thorough function inspections during the assembly. In addition, a water pressure test is performed with a water pressure tester for all products to confirm that the performance conforms to the specifications. However, depending on the carrying and storage conditions, the maintenance status, etc., the waterproof function may be damaged.

Before diving, always perform the following advance test and the water leakage test after installation of the camera.

Making sure the case is waterproofCheck the parts that ensure the case is waterproof.

1.Make sure that the O-ring between the front and rear lids of the case is attached firmly and the buckle is tightly secured.

2.Make sure that the O-rings between the case and standard port are attached firmly and that the buckles are tightly secured.

3.Make sure that the O-ring on the TTL cable connector cap is attached firmly and that the cap is fitted tightly to the connector.

E-17