5.Rough handling, such as jumping into the water with the case in your hand or in an outside pocket or throwing the case into the water, etc. could lead to water leakage. Please always take care when using the case.

6.If the camera contained in the case becomes wet because of water leakage, etc., immediately wipe off all moisture and check the camera is working correctly.

7.Before travelling by air, please make sure you remove the O-ring, otherwise the difference in air pressure may make it impossible to open the case.

8.To ensure safe and trouble-free handling and operation of the digital camera in this product, please read the camera’s instruction manual carefully.

9.When sealing this product, please take care to ensure no foreign matter such as sand, dirt or hair are on the O-ring or contact surfaces.

Batteries

●Use an exclusive lithium-ion battery (Olympus BLM-1) designed for digital cameras.

●Keep the battery's contacts away from damp or humidity; otherwise this could impair performance and/or cause accidents.

●For additional battery cautions, refer to your digital camera's instruction manual.

●The separately available Power Battery Holder for the C-7070 Wide Zoom/C-5060 Wide Zoom (B-HLD20) cannot be used with this product.

Setting the camera’s modeWhen using the C-7070 Wide Zoom

●The C-7070 Wide Zoom camera includes scene modes expressly configured to optimize wide-angle and macro shooting under water. Select the mode according to the scene you want to shoot under water.

For details, see ”Underwater Shooting According to the Scene Type” in this manual (page E-28).

●For details on mode setting, refer to the digital camera’s operation manual.

When using the C-5060 Wide Zoom

●When using this product, set the camera’s mode dial to “P” and use the menu button to select [Mode Menu] ➔ [Shooting] ➔ [Accessory] ➔ [ ].

●For more information, see the camera’s instruction manual.

E-3