Fitting the mode dial knob ……………………………………E-21

Check the loading status. ……………………………………… E-22

Seal the Case. ……………………………………………………E-22

Install the special balance weight. ………………………………E-22

Perform the final checks after loading. …………………………E-23

Installation and Removal of the LCD Hood ……………………E-24

Installation ………………………………………………………E-24

Removal …………………………………………………………E-24

Mounting and Removing the Lens Cap…………………………E-25

Perform the final checks. ……………………………………… E-25

Visual Inspection ………………………………………………E-25

Final Test …………………………………………………………E-26

4. Taking Pictures Under Water …………………………E-27

How to Use the Hand Strap ……………………………………E-27

Take pictures carefully. ………………………………………… E-27

Confirm the picture on the LCD monitor. ……………………E-27

Quietly press the shutter lever. ……………………………… E-27

Cautions when using the flash ………………………………E-27

5. Underwater Shooting According to the Scene Type ………E-28

Shooting scene modes …………………………………………E-28

Selecting the scene mode.……………………………………… E-28

6. Handling After Shooting ………………………………E-29

Wipe off any waterdrop. …………………………………………E-29

Take out the digital camera. …………………………………… E-30

Wash the Case with pure water. ……………………………… E-31

Dry the Case. …………………………………………………… E-31

7. Maintaining the Waterproof Function ……………E-32

Remove the O-ring. ………………………………………………E-32

Remove any sand, dirt, etc. …………………………………… E-32

Install the O-ring. ………………………………………………… E-33

How to Apply Grease to the O-ring ……………………………E-33

Replace consumable products. ………………………………… E-34

Maintenance of the threaded sections on the

TTL cable and TTL cable connector ……………………………E-35

Maintenance of the TTL Connector Cap ……………………… E-35

8.Appendix………………………………………………………E-36Q & A on the use of the PT-027…………………………………E-36After-sale Service …………………………………………………E-41 Specifications ……………………………………………………E-42

E-8