Perform the final checks after loading.

After sealing the case, perform the following final checks to confirm proper operation of the camera.

Confirm that the camera can be turned ON/OFF from the case’s power switch lever.

Confirm that the camera mode can be switched with the case’s mode dial knob.

Press the Case’s shutter level and see if the camera shutter can be released accordingly.

Press other buttons on the Case to see if the camera functions accordingly.

CAUTION : • If the camera does not function properly, restart the digital camera installation procedure from “Check the digital camera.” on page E-19 of this manual.

•Make sure that the mode dial can be moved after the camera has been loaded in the Case. If the mode dial does not move, there may be oil or grease on it; wipe it clean.

•When the digital camera is not used for about 3 minutes while in the shooting mode, it enters the sleep mode (standby status) and no operations are possible. To cancel sleep mode and return to operation status, press the zoom lever, shutter button or any other button. For details, refer to the digital camera's instruction manual.

E-23