![](/images/new-backgrounds/1314393/31439327x1.webp)
Step 1
hex nut lock washer
brass sensor nut
Step 2
Once the correct dimensions are calculated and recorded, the sensor can be installed in the fitting. The Standard and
3.6 Standard Installation
1.Thread one hex nut onto each of the three threaded rods included in package. Install threaded rod with a
2.Thread one jam nut and lower hex nut onto each stud so that the top surface of each nut is at the proper "H" dimension for your pipe. Secure each hex nut with a jam nut.
3.Insert the flow sensor into the brass sensor nut, making sure the alignment hole on the sensor flange is pointing downstream.
lower hex nut, 2nd | lower hex nuts |
jam nut, 1'st | (3/16 x |
| jam nuts |
| (5/32 x |
"H" | hex nut and lock washer |
| brass sensor nut |
process pipe
8