Omega Engineering FP-6000 manual Chapter Maintenance and Replacement Parts

Chapter 5

Maintenance and Replacement Parts

5.1 Maintenance

All versions of the FP-6000 series sensor require little or no maintenance, with the exception of an occasional sensor/paddlewheel cleaning.

5.2 Replacement Parts

(Standard version)

1.Standard sensor assembly FP-6000, -6001

2.Rotor kit (bearings, shaft, retainers, and rotor included), see table below♦

•FP52509-1 kit with stainless steel shaft

•FP52509-2 kit with Tungsten Carbide shaft

3. Instruction manual M-2973

	♦Rotor Kit	FP52509-1 Rotor Kit
retainer	retainer	• Retainer material: 316 stainless steel
	rotor shaft	• Rotor shaft material: 316 stainless steel
		• Bearing material: Fluoroloy B
		• Rotor material: CD4MCu stainless steel

bearing

bearing

rotor	FP52509-2 Rotor Kit
	• Retainer material: 316 stainless steel
	• Rotor shaft material: Tungsten Carbide
Refer to rotor replacement	•	Bearing material: Fluoroloy B
instructions, pg# 17	•	Rotor material: CD4MCu stainless steel

(Hot-Tap version)

4.Hot-Tap sensor assembly FP-6000, -6001

5.Rotor kit (bearings, shaft, retainers, and rotor included), see table above♦

•FP52509-1 kit with stainless steel shaft

•FP52509-2 kit with Tungsten Carbide shaft

6. Instruction manual M-2973

16