| TABLE OF | |
Multiple Channel USB Data Acquisition Module | ||
CONTENTS |
| Page |
Section 1 - Introduction | |
1.1 Precautions | |
1.2 Safety Warnings and IEC Symbols | |
1.3 Statement on CE Marking | |
1.4 General Description and System Components |
Section 2 - Hardware | ||
2.1 | Package Inspection | |
2.2 | Included Items | |
Section 3 - Hardware Setup | ||
3.1 | ||
3.2 USB Hubs and Power Adaptors | ||
| 3.2.1 | |
| 3.2.2 | |
| 3.2.3 Power Adaptors | |
3.3 | Connecting Your | ... |
3.4 Connecting Various Hardware Setups | ||
| 3.4.1 Direct Connection To Computer USB Port(s) | |
| 3.4.2 Connection To | |
| 3.4.3 Connections To | |
3.5 | ||
| 3.5.1 | |
| 3.5.2 | |
Section 4 - Software | ||
4.1 | Getting Started | |
4.2 | Software Installation | |
| 4.2.1 System Requirements | |
| 4.2.2 Software Setup | |
4.3 DAQ Central Software Operation | ||
| 4.3.1 Main Control Window | |
| 4.3.2 Device Configuration | |
4.4 | Power Line Rejection | |
4.5 | Optical Isolation | |
4.6 A/D Conversion | ||
4.7 | Input Ranges | |
4.8 Analog Input Configuration | ||
4.9 | Measurement Duration, Scan Time, and Resolution | |
4.10 Automatic Calibration | ||
4.11 Thermocouple Measurements | ||
Section 5 - Signal Management | ||
5.1 Channel Control and Expansion | ||
5.2 | Scan Time and Resolution | |
| 5.2.1 Scan Time | |
| 5.2.2 Resolution [Effective Number of Bits (ENOB, RMS)] | |
5.3 Under Sampling and Aliasing | ||
i
