Omega Engineering OM88128, OM8800D, OM8828, OM8829 manual Sleep Mode Setting, Data Table

SLEEP MODE SETTING

Model OM8828/OM8829 logger (LCD display) will stop displaying on the LCD after completed recording, i.e. The figures will be disappeared (This should be set up from computer before recording ). Easy to click and press the slide switch to the right for SLEEP then click OK . You may select NON-SLEEPand press OK , then the logger will always display current Temperature / Relative Humidity after completed recording , but please be noted that this setting will consume the battery power . (The software default Non-Sleepmode)

Sleep Mode Setting

Non-Sleep

Sleep Ok

Diagram G-1:

Sleep Mode

setting

DATA TABLE

Depress icon to view detailed data table,which includes 200 sample readings.Temperature data shows the curser 1,If you are logging model OM8829 (Temp. & Relative Humidity) , RH% reading shows next to the temperature reading .

Print out the data table to either a printer or a fax /internet application depending on your available facilities.(See Diagram H )

20