3
Setting Up the Pump(s)
3.1 Introduction
To attach a single pump directly to a pump motor, follow the procedure in Section 3.3.1.
To stack two pumps to a motor, follow the procedure in Section 3.3.2.
To attach the pump to an adapter plate (for your own motor), follow the procedure in Section 3.3.3.
To use your own adapter plate, follow the procedure in Section 3.3.4.
NOTE
Before you mount the pump to any pump motor, make sure that power to the motor is turned off.
3.2 Required Hardware
Number of Pumps | Mounting Screw | Mounting Screw | Number of | Adapter Plate* |
Stacked | Type | Part Number Mounting Screws | Assembly Number | |
|
|
|
|
|
1 | Standard | 2 | ||
2 | Long | 2 | ||
*Optional adapter plate assembly includes mounting screws and pins
**Supplied standard with pump; can only be used to mount a single pump
†Must be specified at the time of ordering the pump; can only be used for mounting 2 stacked pumps
