One for All URC-8910

6. (Optional) Skip this step ifyour TV/VCR Combo

does nothave a separate TV code. Otherwise,press

TVonce.You will see the display change to [TV]and

its current code.

Use the keypad to enter the separate TV code for

your device.

7. Press EXITto exit the programming mode.You will

see [EXIT SETUP]as the URC-8910 remote control

returns to normal ope ration.

8. To verify the code works,aim the URC-8910 remote

control at the desired device,press VCRonce and

then press POWERonce.The TV/VCR Combo

should turn off. If it does not respond, repeat steps 2

through 8,trying each code for your brand until you

find one that works.If it still does not work,try

Searching For Your Codeon page 27.

NOTE:If the device does not have a POWERke y,press the

(Play) key.

NOTE:For VCR/TV Combos programmed with separate TV

codes,TV volume i s controlled by pressing VCR first and

then TV.After that,use VOL+ (or VOL-) to raise (or lower)

the TV volume.For other alternatives on controlling volume

keys,see “Changing Volume Lock” on page 32 or “Using

Keymover”on page 38.

9. For future reference,write down the working

TV/VCR combo code in the below boxes:

TV/VCRCode:

TVCode

(ifused):

Producer 2002 IR Mnl 4/4/02 10:01 AM Page 13