USING MACROS
With programming,the M1through M3 keys on your URC-8910
remote control can be setup to perform repetitive,time-consuming
operations for easy,convenient access through the press ofa single
key.Macro keys are ideal for home theater operations,setting a
favorite channel,guide steps,or other multiple functions you would
like to control with one key press.Moreover,each macro key can
hold up to15 key presses total.
NOTE:Programming a new macro over an existing one will erase the
original macro.

Programming A Favorite Channel

With so many channels available through your cable or satellite
system provider,you can program a macro that directly selects a
favorite channel with one key press.For example,let’s assume your
favorite cable programs are on channel 71.Perform the following
steps to program a macro key for direct access ofthis channel:
NOTE:This example assumes the TV tuner is connected directly to the cable
line and not through a cable converter.
1. On the URC-8910 remote control,press and hold
SETuntil you see the display change from the cur-
rent device and time to [CODE SET].
NOTE:The device, its code,and time are examples.Your
remote control settings may be different.
NOTE:To exit programming at any time, press EXIT once or
allow 30 seconds ofinactivity to lapse.You will see [EXIT
SETUP] as the remote control returns to normal operation.
NOTE:[INVALID] means you have inadvertently pressed an
incorrect key.Note your error and cont inue programming.
2. (x 6) Press the ▼key six times until you see the display
change to [KEY MACRO].
NOTE:If you go past [KEY MACRO],press the
▲
key one or
more times to return to it.
3. Press SELECTonce to beg in programming. You will
see the display change to [SEL MACKEY].
4. Select an open macro key (e.g.,M1) and press it
once.You will see the display change to [ENTER SEQ].
21
Producer 2002 IR Mnl 4/4/02 10:01 AM Page 34